Lighting for your tractor or farm machine
Whether you are restoring a classic tractor or replacing the lights on a working farm vehicle, good lighting is essential both in the yard and on public roads. At Tomaxclassics, we stock headlights, work lamps, rear lights and signal lighting for tractors, agricultural machinery and trailers — from trusted names including Hella.
Our agricultural vehicle lighting range includes:
Headlights:
• Round tractor headlight (e.g. Hella 1A3 003 370-041 — R2/Bilux, 12V, ECE) — for Deutz-Fahr, Fendt, Massey Ferguson and more
• Rectangular tractor headlight — various sizes and connections
• Headlight with H4 bulb (combined dip and full beam)
• Headlight with R2/Bilux bulb (separate dip and full beam circuits)
• Headlight inserts and reflectors
Work lamps:
• LED work lamp — high light output, low power draw, vibration-resistant
• Halogen work lamp — broad beam for night-time field work
• Work lamp for cab mounting or implement frame mounting
• Magnetic work lamp — temporary mounting on machine or trailer
Rear lights and signal lighting:
• Complete rear light unit 12/24V — combining brake light, tail light, indicator and number plate light in one housing
• Indicator / direction indicator — for tractor and trailer
• Rotating beacon (flashing light) — required for agricultural vehicles on public roads
• Rear fog lamp
• Number plate light for agricultural vehicles
• Third brake light / marker light
Bulbs and accessories:
• R2 (Bilux) 12V — for older tractor headlights
• H4 12V and 24V — for newer tractor and machine headlights
• P21W — for indicator and brake light in trailer lighting
• R10W — for position light in trailer lighting
• Lamp holders, sockets and housings
• Connection cables and connectors (7-pin trailer plug)
R2 (Bilux) or H4: which bulb fits your tractor?
Many classic tractors (built before approximately 1980) are fitted with an R2 headlight, also known as Bilux. The R2 bulb has two separate filaments — one for dipped beam, one for full beam — each with its own contact pin. The Hella 1A3 003 370-041 is a typical example: a universal R2 round headlight for Deutz-Fahr, Fendt and Massey Ferguson. Newer tractors use an H4 bulb with three contact pins in a different fitting. R2 and H4 are not interchangeable — always check the bulb type of your headlight before ordering.
12V or 24V: check the electrical system
Almost all tractors run on a 12V electrical system. Trailers and self-propelled farm machinery such as combines and sprayers sometimes use 24V. Rear lights and indicators for agricultural trailers are therefore often available in a 12/24V dual-voltage version, suitable for both systems. Always check the voltage of your vehicle or trailer before ordering a bulb or lighting unit.
Rotating beacon: legally required on public roads
Agricultural vehicles wider than 2.60 metres or slower than 25 km/h are legally required to display an orange rotating or strobe beacon when travelling on public roads. This applies to tractors with wide implements, ploughs and other attachments that extend beyond the lane width. All beacons in our range are ECE-approved for legal use on public roads across the EU.
ECE approval: required for use on public roads
Lighting components for use on public roads must carry an ECE type-approval mark (E-mark, visible on the headlight or rear light housing). All Hella lighting in our range is ECE-approved and fully legal for use on public roads in the Netherlands and throughout the EU.
Not sure which type fits your tractor or machine? Contact us at +31 6-18298736 or send an email. We will help you find the correct part.
Order before 4 PM and your order will be dispatched the same day. Free shipping within the Netherlands and Belgium from €100. For other EU countries, please check our shipping page.